Arduino Nano - Atmel MEGA328P

Pinout

• 5V - comes form USB-C VBUS and/or output of the regulator (VIN); MCU has operating voltage of 1.8 - 5.5V
  
• VIN - goes to the regulator and can be maximum 15 V; minimum 5 + ~1.1 (dropout) for regulator to regulate; MCU should run with 2.9 V
  
• 3V3 - output from USB-UART 

Schematics

Atmel MEGA328P

Clock: 16 MHz Program Memory Size: 32 KiB RAM: 2 KiB Data EEPROM: 1 KiB

Datasheet: ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf

LM1117C 50 - 5V regulator

Datasheet: lm1117.pdf

CH340C - USB-UART

Datasheet: CH340DS1.PDF

Programming

Arduino / avrdude

Install IDE (and avrdude):

xi arduino

The board shows up on /dev/ttyUSB0 and can be programmed with CTRL-R (Compile/Verify) and CTRL-U (Upload).

Rust

• https://book.avr-rust.org/
• https://github.com/avr-rust/awesome-avr-rust
• https://github.com/Rahix/avr-hal
  

cargo +stable install --locked ravedude
cargo install cargo-generate
cargo generate --git https://github.com/Rahix/avr-hal-template.git # Select: Arduino Nano New Bootloader
cargo build
RAVEDUDE_PORT=/dev/ttyUSB0 cargo run